What Is Refacing Cabinets?

If you’re searching for “What is refacing cabinets?” the answer is quiet simple. Refacing is just a superficial way to cover exposed frames using thin veneers of real wood or using plastic laminate. However, the savings and results are often dramatic.

The drawer fronts and doors on your cabinets will be replaced to compliment or match the new veneer. New molding, pulls, knobs, and hinges will complete the whole look.

The Pros And Cons Of Cabinet Refacing:

There are quiet a few pros and only a couple cons to refacing your cabinets.

Refacing Pros:

  • It’s a green way to remodel your kitchen because you aren’t adding to landfills.
  • You can still use your kitchen during refacing.
  • It is less hassle then demolishing cabinets.
  • Takes less time and less money to complete.
  • Costs about 50% less than replacing cabinets.

Refacing Cons:

  • May be tempted to spend more on exotic hardware and veneer which is expensive.
  • Refacing doesn’t fix a bad design of the kitchen.

Reface Or Replace Your Cabinets: Costs And Options

You’ll have options for synthetic, real wood, and other options which affect the cost of refacing your cabinets.  Read through the options and cost factors to get a better idea of what will work best for your situation and home.

What Options Are There For Refacing?

You will have choices for a finished look on your cabinets that are limitless. Veneers can come in a huge variety of grains, textures, patterns, colors and much more, which you are able to mix and match to have a low-cost facelift for your kitchen.

Plastic laminates will have hundreds of patterns and colors. They are also moisture resistant and durable and are very reasonably priced. You can pick a contrasting or matching laminate for drawer fronts and doors.

Wood veneers will include the standard types like maple, cherry, and oak, and you can pick from a variety of stain colors. Wood veneer will be a very expensive option and the wood has to be carefully sealed to protect against any moisture.

Thermofoil doors which have a plastic coating that is durable which is placed on fiberboard is a very affordable alternative to laminate or wood doors.

You can go further and update and customize the look of your cabinets by adding new cabinet hardware.

What Will Refacing Cost?

If you opt for professional refacing on your cabinets for a basic 10 ft by 12 ft kitchen, you can look to spend between $1500 to $3500 for laminate. If you want wood veneer you can spend between $3000 to $6500. Now, if you are wanting to have a larger project done with a high-quality wood veneer then you can spend between $7500 to $9500.

You will have to finish the project using new hardware like hinges, pulls and knobs which can run between $3 to $5 per piece and for high end hardware it can run between $25 to $60.

When you compare it, replacing your kitchen cabinets with brand new cabinets can run between $4500 to $5500 or more just for stock cabinets. If you want semi-custom cabinets, it can cost between $8500 to $10,500 and for custom cabinets it can between $15,000 to $25,000.

How To Tell If Cabinets Are Good For Refacing

Refacing is an option if your cabinet boxes are in good condition and structurally sound. Cabinets that have broken frames, water damage or warping are not going to be good candidate. Particleboard cabinets will often require a fastener, plus adhesives which make sure that the veneer is secure.

How Will They Be Installed?

Professional installation will require an installer to come to your home and measure out your cabinets to check how much veneer will be needed, the quantity for the drawer fronts and door and the correct sizes, and just how much hardware is going to be needed. New drawer fronts and doors can take up to 2 weeks to be delivered.

When the materials are all there, the installer will remove your old cabinet drawer fronts and doors and will prepare the surface of your cabinet boxes by washing exteriors using a degreaser and then lightly sanding the finish. Any type of flaws that are in the surface will then be filled or repaired to give the cabinet a secure, and smooth fit for the veneer.

The installer will then apply the veneer to your cabinets and any type of exposed cabinet parts and then they will mount the new drawer fronts, hardware and doors. This process can take up to 5 days.

Is It Possible To Reface Cabinets On My Own?

Adhesive backed veneers and detailed instructions can allow refacing to be a good DIY project.

How To Reface The Cabinets

If you have spare time, the needed tools, patience and are good at precision, then you can save some money by refacing your cabinets on your own.

If you decide to do this on your own, you will spend between $250 to $550 for all the materials. Specialty tools such as irons, rollers, and blades can add between $10 to $75 to the overall cost.

Replacement Cabinet Doors & Drawer Fronts

Once your cabinets are refaced you will likely want replacement cabinet doors and drawer fronts to compliment the new look and style of your kitchen or bathroom.  Cabinetdoor.com is proud to offer direct to the consumer wholesale prices on cabinet doors.  We are the factory and you can place any order on our site; no matter how big or small.  We ship straight to your home for your convenience.

Leave a Reply

Your email address will not be published. Required fields are marked *